...

• HHD
• Autosync cable with the serial prongs
• Programming credential
• Room Checklist
• Master Key card for research rooms. (You will NOT be entering the rooms though.)

Collecting Audit Data

Of all the processes required to manage electronic locks, collecting audit data is probably the most automated. To collect the data:

...

After you have collected the data, it needs to be downloaded onto the computer. 

• If the Schlage Utility Program is still running, close it before doing anything else by clicking "ok" in the upper right corner of the screen.
• Plug the HHD into the computer. Make sure it is turned on and active.
• Also plug it into the AC adaptor cable so that it can charge it's battery.
• Open the Windows Mobile Device Utility.
• The HHD should automatically sync. If it doesn't, you may have to unplug the HHD and try again.
• Allow the HHD to sync the files to the computer using Windows Mobile Device Utility.
• That's it. That's all you have to do. 

Troubleshooting When Collecting Audit Data

"Audit report already exists. Overwrite existing report?"

The answer is no. Always no at first. It's a pain but take the HHD to the computer and download the data. Then go back to pulling audits. If you get the message again after syncing the HHD with the computer, then you can override the report.

Date/Time doesn't match HHD message

...