| Table of Content Zone | ||||
|---|---|---|---|---|
|
...
Task | Web Application | Mobile Application |
|---|---|---|
Add/delete/edit user | Yes | Yes** |
Add/remove team member | Yes | Yes |
Add/delete credentials | Yes | No |
Assign/Remove access | Yes | Yes** |
Create device schedules | Yes | No |
Assign device schedules | Yes | Yes** |
Assign device groups | Yes | No |
Add/delete device | No | Yes** |
Update programming | Yes | Yes** |
Update firmware | Yes | Yes** |
Configure Wi-Fi | No | Yes** |
Retrieve Audits | Yes | Yes** |
** Must be connected to the device through the mobile app
...
Click the Refresh List button on the Select Exiting Credential tab to see the credentials you have just added.
Select the credential you want by matching the numbers on the screen with the 6 digit number printed on the card. This is the hot stamp.
If the credential is for someone in LEAD or a Master key holder, the credential should be Pass Through. This credential type allow access even when batteries are getting low on power.
All other credentials should be Normal. They will not allow access with batteries are getting low.
Click Save.
.png?version=1&modificationDate=1724855607836&cacheVersion=1&api=v2&width=250)
The hot stamp will be part of the credential name, making it easy to identify.
Jump to No-Tour programming below.
...
Manual Updates
Scheduled Updates
No-Tour Programming (Smart Cards Only)
No Tour programming allows the card to carry the programming to the lock instead of programming the lock manually or through an overnight scheduled update.
...