Setting up new software, locks, and peripherals

Owned by Kelly Holcomb (Unlicensed)
Last updated: Aug 02, 2022 by Lucinda Amerman (Unlicensed)
2 min read

Schlage Express Software

If you need to reinstall the Schlage Express software, call Allegion. They no longer install the software from a disc but from a download instead. They also need to install a patch for Windows Mobile Device since that application is no longer included in Windows. The should walk you through the entire process.

Back up your data

Before you call Allegion, collect audit data from all of the locks and back up the files. Once you reinstall the software, old audit data may not be accessible from the locks. This is especially important for the Grad Student Commons Research rooms.

Preparing to install new software

If you end up purchasing new or replacement locks, peripherals or software, there are several things to be aware of if you want to safe your data and have the installation go smoothly.
  • Collect the audit data from all the doors one last time. Download the data and back-up your facility files.
  • Make note of the current file path configurations for:
    • Backing up the facility files
    • Downloading data from the HHD
  • Plan to spend time on the phone with Allegion. You will need help with:
    • Download Windows Mobile Device Center and a patch that will allow it to work on Windows 10. 
    • Downloading any necessary firmware updates for new or existing locks.
    • Downloading the Schlage Utility Software for the HHD.
    • Downloading any necessary firmware updates for the HHD.

Installing Schlage Express Software

Call Allegion: 877-671-7011

File paths for the software

  • Backup for SES: S:\Restricted Share\Admin\Building\Electronic locks


Engage Software